Bridge placement is important to get the best sound out of your banjo. The intonation is improved by having the bridge in what is called the “sweet spot” on the banjo head. This is actually easy to do as a banjo has a floating bridge (it is held on by the tension of the strings) and with practice you will actually enjoy playing with the harmonics of our banjo fingerboard to place the bridge in the right place.

Many folks mark their bridge placement with a pencil line. This is fine for a starting point, but you must always use the harmonics for final bridge placement.  You should check bridge placement when you install new strings, at minimum. Checking it periodically is a good idea. It helps develop your use of the “harmonics” technique and this is a technique used in songs as well. Head tightening will move the banjo head membrane so you should again double check your bridge placement when you are finished tightening the head or when you change the banjo head. Once you hear the difference in the sound…and you WILL hear it…with good bridge placement, you will be happy to make the adjustment.

Below are the directions for bridge placement from our maintenance manual that is available http://www.deeringbanjos.com/support/maintenance-manuals. You will find these and many other great things to help with seting up your  banjo in the manuals which are available as a free download.

HOW TO SET THE BRIDGE

1. For an approximate setting, place the bridge perpendicular to the strings - 26 3/16” from the nut, in spite of the 26 1/4” fret scale length(these measurements are for a standard length 5-string banjo), because strings do not vibrate according to the exact calculations of physics.  A general starting point on any banjo is to place the bridge the same distance away from the 12th fret as the nut is from the 12th fret.

2. To get the bridge set exactly, use harmonics: On the first and fourth strings, play the 12th fret harmonic by lightly touching the string above the 12th fret while plucking the string.  This should ring clearly, and is called harmonics or sometimes referred to as "chimes".  It is o.k. if your bridge is not exactly perpendicular to the strings.

COMMENTS

Introducing the New Goodtime Banjo Ukuleles
Introducing the New Goodtime Artisan Banjos

Search Blog Post

YOU MAY ALSO LIKE

Jun 13.2018

How To Adjust Your Banjo's Truss Rod

Proper adjustment of your banjo's truss rod allows you to put a little bit of concave curve in the neck of your banjo to make the playability a lot easier....

May 10.2018

How Banjo Head Tension Affects Your Tone

One of the most important aspects of your banjo set up is the head tension. Changes to your banjo head tension dramatically affect the tone of your banjo. It...

Oct 26.2017

Deering Launches Banjo Service Center

Deering has kicked off its new Service Center with three easy to order service packages. The banjo is to making music what a knife is to a chef. It is the tool...

Aug 3.2017

3 Tips for Everyday Banjo Care

Keeping a banjo in top notch playing condition doesn’t have to be a difficult or time consuming task. Keeping a banjo in pristine condition is easier than you...

sign up for our newsletter